Thank you for booking onto our Abrasive Wheel Operator training course. This course is delivered in two parts. Part 1 consists of three generic abrasive wheel training videos (via our webinar software), theory test paper (available as a downloadable document on the first training video) and machine specific training (via our webinar software). Part 2 is a half day practical training session. Click on the relevant links below to start each training video.
Video 1 (approx. 43mins) : https://attendee.gotowebinar.com/register/925566005451207695
Video 2 (approx. 38 mins) : https://attendee.gotowebinar.com/register/3387680403297656335
Video 3 (approx. 19 mins) : https://attendee.gotowebinar.com/register/8696468888362998799
Theory Test: Download a copy from the first training video or download your copy below.
In addition to the above generic abrasive wheel training, you must watch the machine specific training videos relating to the machines you use:
(for angle grinders and hand-held grinders)
(for bench and pedestal grinders, also suitable for people who carry out precision grinding)
(for petrol cut off saws)
Practical training assessment (approximately 45 minutes). This will be delivered by a BAF accredited trainer on your site/premises or as an open course at one of our training venues – for a maximum of 3 people per 45-minute session.
Don’t forget to bring the test sheet with you on your abrasive wheel course.
All tests will be marked on the training day during your practical training session.
In addition to the above training our resources page on our website will give you links to legislation, resources and advice which you mind find helpful. Click on the link below (in red).
Any queries relating to your training please feel free to contact us via email at [email protected]