Call us on: 01423 611030

 

Safe Working at Heights Training

Home > Other Courses > Safe Working at Heights Training

The safe working at heights course can be tailored to the requirements of your business. When applicable, this course will include the correct use of ladders and harnesses.

This course is currently unavailable due to coronavirus. As an alternative please visit the online working at height course.

In time we will be re-writing our courses to run as blended courses which will minimise the amount of time we need to spend on site. The blended course will contain an online theory course, combined with some time on site for the practical element. Until this is available we can offer a full online manual handing course – visit the page here.

Our on-site safe working at heights training will provide delegates with the information they need perform work tasks efficiently and safely. It will cover key aspects of working at a height, such as weather conditions and controlling risks. It will be conducted over a half day in accordance with the requirements of the Working at Heights Regulations 2005.

Prefer to do your training online? Find all the e-learning courses available here.

Enquire Now to Book


    View our Privacy Policy at the bottom of the page (click on Privacy Policy)



    or Call Us on 01423 611030

    Training and Testing Services offer and excellent Safe Working at Heights Training Course, helping to equip workers with the relevant skills and knowledge to keep the safe when working at height.

    Falling from heights is the single biggest killer of workers in the UK across all industry sectors, and consequently it resulted in the long awaited introduction of the Work at Height Regulations in April 2005.

    In 2008/09 there were 35 fatalities, 4654 major injuries and a further 7065 injuries that caused the injured person to be off work for over 3 days or more, due to a fall from height.

    Course Content

    This course is conducted in accordance with the requirements of the Working at Heights Regulations 2005 and covers the following subjects:

    • What is working at height?
    • Risk assessment
    • Controlling the risk
    • Weather
    • Emergency Rescue
    • Fragile Surfaces
    • Falling Objects
    • Selection, Use & Maintenance of Equipment
    • General Scaffolds
    • Tower Scaffolds
    • Mobile Elevated Working Platforms (MEWPs)
    • Work Restraint
    • Collective Fall Arrest
    • Personal Fall Protection
    • Fall Arrest
    • Inspection & Fitting a Harness
    • Suspension Trauma
    • Ladders & Step Ladders

    Who Should Attend?

    The Work at Height Regulations 2005 came into force on 6 April 2005, and apply to all cases of working at height where there is a risk of a fall that’s liable to cause personal injury.

    As part of the Regulations, duty holders must ensure:

    • All work at height is properly planned and organised.
    • Those involved in work at height are competent.
    • The risks from work at height are assessed and appropriate work equipment is selected and used.
    • The risks from fragile surfaces are properly controlled.
    • The equipment for work at height is properly inspected and maintained.

    Training Course Requirements

    This course is for a maximum of 15 trainees and can be conducted on any site that has suitable facilities (power and seating).

    The practical element of the training will be conducted using the customer’s equipment where possible and it is the customer’s responsibility to ensure the equipment is suitable for its intended use and is properly maintained.

    Certification

    On completion of the course, you will receive a certificate of attendance (which is emailed in a PDF format), an individual training record (to provide proof of training) and a comprehensive set of course notes for each trainee.

    Enquire online to book or CALL 01423 611030

    • "Very good and highly recommended very concise and informative."

      02/28/2018

    • This is just a quick email to say thank you for the training you delivered this week, I found the course to be of great value and I gained lots from the course, I also found it interesting when you were talking about the precision grinding even though this is an area I do not work within. You catered well in my opinion for everyone on the course. Your set up is great - everything in one place + your knowledge was invaluable during the day and it just shows that those who have actually worked within the area they teach make the best tutors. I have attended so many courses where it is obvious the trainer has not had the experience in the subject but this is not the case with you. Great course, great delivery

      J Telford

    • "First Class course, Very Professional."

      01/16/2018

    Other Courses

    Vehicle Banksman Training

    Vehicle Banksman Training

    Risk Assessment Training

    Risk Assessment Training

    Online Manual Handling Training

    Manual Handling Training

    TTS accreditation and memberships