Abrasive Wheel Training for Petrol Cut Off Saws and Angle Grinders

TTS ABW8: Abrasive Wheel Training for Petrol Cut Off Saws and Angle Grinders.

We are changing the way that we deliver our abrasive wheel training courses:

Due to the coronavirus we have had to make significant changes in how we conduct abrasive wheel training on site at our customers premises.

Further to conducting training and RPE testing for the NHS during the coronavirus pandemic and following guidance from the Health and Safety Executive, the following measures will help us to minimise the risk of contamination whilst still delivering the highest quality service.

We will no longer be delivering the theory part of the training course on-site so we can minimise social contact. 

The theory part of the training course will now be delivered via an online webinar, all trainees will be required to watch this and complete a theory test prior to the practical training taking place.

The practical training is an integral part of an abrasive wheel course this part of the course cannot be successfully completed virtually.

“There is no substitute for thorough practical training in all aspects of the mounting and use of abrasive wheels.” Source HSG17 “Safety in the Use of Abrasive Wheels”.

The practical element of the training will be conducted on your site but in small groups of a maximum of 3 people at a time and taking approximately 45 minutes to complete each group.

The practical training will include: wheel changes, dressing of the wheels where required and an operator competency assessment.

This abrasive wheel course is accredited by the BAF (British Abrasives Federation) and is for operators of angle grinders & petrol cut off saws.

An angle grinder features a heavy duty abrasive cutting or grinding disc that is powerful enough to cut or grind through steel, concrete and other hard materials.

Powered by electricity, compressed air or a  battery powered motor, these hard-wearing tools demand that every safety precaution is followed to help prevent injury.

This course covers all aspects of how to use a petrol cut off saw/floor saw safely including the selection of PPE, selection of abrasive wheels, operating the machine safely, refuelling,  safe transportation etc.

There are far too many abrasive wheel accidents reported in various work places, these accidents range from minor to severe; some resulting even in fatality.

The good news is that over 90% of these accidents are preventable if good safety precautions are adopted and this starts with thorough accredited training for all operators.

We are one of the leading providers of abrasive wheel training courses in the U.K.

All of our abrasive wheel training courses are accredited by the British Abrasives Federation (BAF).

All of our instructors are also machine operators so fully understand all aspects of cutting and grinding.

Enquire Now to Book

    View our Privacy Policy at the bottom of the page (click on Privacy Policy)

    or Call Us on 01423 611030

    abrasive wheels training north yorkshire

    Abrasive wheel training for petrol cut off saws and angle grinders.

    This course can be delivered as a half day course for experienced operators, or for refresher training, or as a full days course for the less experienced or novice operator.

    This course can be delivered on your site/premises anywhere in the UK at a time and on a date to suit you, or we run regular open/public courses throughout the year at convenient locations across the UK.

    Course Content

    We have 2 options for abrasive wheels for petrol cut off saw and angle grinder training:

    Option 1: A half day course which is more suited to experienced operators or for refresher training.

    Option 2: A full day course for the less experienced or novice operators who require more practical training.

    • The Need to Train and Statutory Requirements
    • Characteristics of an Abrasive Wheel and the Types
    • Marking of Abrasive Wheels
    • Speed
    • Hazards and Precautions to be taken
    • Kickback
    • Personal Protective Equipment (PPE)
    • Angle Grinder Safety
    • Petrol cut Off Saw Safety
    • Refuelling
    • Storage & Handling
    • Inspection and Methods of Testing for Damage
    • Abrasive Wheel Machine Components
    • Guarding
    • Specific Mounting Procedures

    If you book a half day course then why not add another half day course or accredited face fit tests for only £210 + VAT.

    Choose from:

    Abrasive Wheel, Asbestos Awareness, Manual Handling, Safe Working at Heights, Vehicle Banksman, Risk Assessment or up to 10 fit2fit Accredited Face Fit Tests.

    Who Should Attend Our Course?

    Delegates who are involved in the use of abrasive wheels, and those who are responsible for the changing of abrasive wheels, or those who supervise abrasive wheel operations.

    “In relation to abrasive wheels, PUWER 98 requires, among other things, that all machinery is suitable for its intended use and is properly maintained, and that employees, including those using, mounting and managing the operation of abrasive wheels, are fully informed and properly trained in their safe use”.

    Source: HSE Publication HSG17 (Safety in the use of Abrasive Wheels).

    On completion of this course you will receive a nationally recognised BAF accredited certificate of training and the attendees details will be entered in to the BAF national operators database.

    Training Requirements

    Conducted on any site that has suitable facilities (power and seating), this course is for 1 to 12 trainees but we can train up to a maximum of 15 trainees.

    When conducting the practical element of the training where possible we like to use the customer’s equipment it is their responsibility to ensure the equipment is suitable for its intended use, that is properly maintained and that all trainees are in possession of the correct PPE for the type of machine that they will be using.

    Enquire online to book or CALL 01423 611030
    TTS accreditation and memberships